Установка Kaspersky Endpoint Security 10 для Linux

Материал из Rosalab Wiki
Версия от 12:35, 19 ноября 2018; Oleg Mihailov (обсуждение | вклад) (Новая страница: «== Для Кобальт 7.3 == === Без GUI === При отсутствии необходимости в GUI, можно сразу заняться уста…»)

(разн.) ← Предыдущая | Текущая версия (разн.) | Следующая → (разн.)
Перейти к: навигация, поиск

Для Кобальт 7.3

Без GUI

При отсутствии необходимости в GUI, можно сразу заняться установкой скачанного RPM-пакета: sudo yum localinstall kesl-10*.rpm

При запуске установки терминал показывает примерно следующее:

[oleg@localhost Загрузки]$ sudo yum localinstall kesl-10.1.0-5960.x86_64.rpm 
Загружены модули: langpacks
Проверка kesl-10.1.0-5960.x86_64.rpm: kesl-10.1.0-5960.x86_64
kesl-10.1.0-5960.x86_64.rpm отмечен для установки
Разрешение зависимостей
--> Проверка сценария
---> Пакет kesl.x86_64 0:10.1.0-5960 помечен для установки
--> Проверка зависимостей окончена

Зависимости определены

================================================================================
 Package    Архитектура  Версия            Репозиторий                    Размер
================================================================================
Установка:
 kesl       x86_64       10.1.0-5960       /kesl-10.1.0-5960.x86_64       141 M

Итого за операцию
================================================================================
Установить  1 пакет

Общий размер: 141 M
Объем изменений: 141 M
Is this ok [y/d/N]: y
Downloading packages:
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
  Установка   : kesl-10.1.0-5960.x86_64                                                                                                                    1/1 
Created symlink from /etc/systemd/system/multi-user.target.wants/kesl-supervisor.service to /etc/systemd/system/kesl-supervisor.service.

Kaspersky Endpoint Security 10 SP1 for Linux has been installed successfully,
but it must be properly configured before using.
Please run "/opt/kaspersky/kesl/bin/kesl-setup.pl" script
manually to configure it.

  Проверка    : kesl-10.1.0-5960.x86_64                                                                                                                    1/1 

Установлено:
  kesl.x86_64 0:10.1.0-5960                                                                                                                                    

Выполнено!

После установки, как указанно в терминале, следует запустить скрипт для конфигурирования: sudo /opt/kaspersky/kesl/bin/kesl-setup.pl

И ответить на вопросы (в квадратных скобочках указаны ответы по умолчанию).

При запуске скрипта терминал показывает примерно следующее (ответы указаны только для тестового примера (!)):

[oleg@localhost Загрузки]$ sudo /opt/kaspersky/kesl/bin/kesl-setup.pl

Kaspersky Endpoint Security 10 SP1 для Linux version 10.1.0.5960

 
Setting up the Anti-Virus Service default locale

You must specify a locale that the Anti-Virus Service will use when
applying the protection settings.
It is important to specify the locale you are using when working with the
file system names (in most cases this should be the system default locale)
[ru_RU.UTF-8]: 

Anti-Virus Service default locale is changed to 'ru_RU.UTF-8'.
Service will be restarted if it is already running.

Accepting the End User License Agreement (EULA) and Privacy Policy

Please read and accept the End User License Agreement (EULA) and Privacy
Policy to continue.

NOTE: To quit the EULA and Privacy Policy viewer, press the Q key.

Press ENTER to display the EULA and Privacy Policy: 


Read EULA and Privacy Policy from file:
"/opt/kaspersky/kesl/doc/license.ru" (utf-8), if it cannot be read here.

Do you accept the EULA conditions? [y/n]: y                               

Do you accept the Privacy Policy conditions? [y/n]: y


Configuring KSN

Do you want to participate in KSN (you can read the KSN Statement here:
'/opt/kaspersky/kesl/doc/ksn_license.ru')? [y/n]: y


Configuring file interceptors

Checking if fanotify is available...
Using fanotify interceptor
Starting Kaspersky Endpoint Security 10 SP1 для Linux. This can take
some time. Please wait.

Configuring the update source

Specify the update source. Possible values: KLServers|SCServer|<url>:
[KLServers]: 


Configuring proxy settings to connect to the updates source

If you use an HTTP proxy server to access the Internet, please enter
the address in one of the following formats:
proxyIP:port or user:pass@proxyIP:port, or enter 'no' [n]: 

Updated databases are an essential part of your server protection.
Please note that the application may be restarted during the update
process.
Do you want to download the latest databases now? [y]: 


Downloading the latest application databases

Выполнение задачи:
[##################################################]100%
Latest databases are downloaded.
Restarting Kaspersky Endpoint Security 10 SP1 для Linux. This can take
some time. Please wait.

Enabling automatic updates of the application databases

Do you want to enable scheduled updates? [y]: 

Scheduled updates are enabled.
The application databases are scheduled to be updated hourly.

Activate the application

You must activate the application to use it.
To activate the application now, enter the path to your key file or an
activation code. Enter an empty string to activate the built-in trial key:


The built-in trial key activation has completed successfully.

Configuring GUI

Do you want to use the GUI? [y/n]: n

[oleg@localhost Загрузки]$

С GUI

Если требуется GUI, то сначала следует установить дополнительные пакеты: sudo yum -y install libxml2 libX11 libXi libSM libICE freetype fontconfig libxcb xcb-util-*

Остальные действия остаются неизменны.

Рекомендации

  • В случае, если вы точно знаете, как вы хотите сконфигурировать приложение, можно использовать файл с автоответами.

Пример: cat autoinstall.ini 

EULA_AGREED=yes
PRIVACY_POLICY_AGREED=yes
USE_KSN=yes
SERVICE_LOCALE=en_US.utf8
UPDATER_SOURCE=KLServers
PROXY_SERVER=none
UPDATE_EXECUTE=yes
KERNEL_SRCS_INSTALL=no
USE_GUI=no

Запуск: sudo /opt/kaspersky/kesl/bin/kesl-setup.pl --autoinstall=autoinstall.ini