Errata ROSA Marathon X1

From Rosalab Wiki
Revision as of 12:45, 26 July 2012 by Akdengi (Talk | contribs) (Very long boot time with VMWARE installed)

Jump to: navigation, search

Installation

Boot from hardisk does not work

If your bootloader is located not on the first physical disk, this option will not working.

System boots into the 'Live' mode after reboot

After system installation is complete and you reboot the machine, do not forget to eject your installation DVD or USB media, since by default the 'Live' mode will activated. Alternatively, you can change the priority of boot devices or choose 'Boot from hard drive' when booting from the installation media.

If installed from USB Flash, the system displays a message about 'Emergency mode'

If you install the system from USB Flash, you can a message about 'Emergency mode' after removing installation media rebooting. If this is the case, just insert the USB Flash back, load from it, choose 'Boot from hard drive' and finalize the installation (there will be several question from wizard). After that, you will be able to boot the system normally.

If you have Windows partitions, you may need to load Windows and run scandisk.

Incorrect resolution with Intel graphics cards

If you have a modern Intel graphics card, you may need to delete the following parameter from the boot loader menu entry:

nomodeset

Very long boot time with VMWARE installed

In case your boot takes very long time you can try disabling pcscd service in your host system. It can be done via drakxservices, or by executing command

systemctl disable pcscd.service

from root user.

Adaptor ROM Conflicts

This information relates to error messages such as the one outlined in the page title and other similar ones - for example:

pci_root PNP0A08:00: address space collision: host bridge window [mem
0x000cc000-0x000cffff] conflicts with Video ROM [mem 0x000c0000-0x000ce9ff]

This error message occurs due to the way 2.6.34 and later kernels enumerate PCI host bridges and is not specific to Alpine Linux - see this kernel bug report. The message itself does not indicate a functional problem, so it can be ignored. If you see additional problems, such as computers with multiple NICs not starting all adaptors reliably and issues with multi display/adaptor configurations, please report them in the kernel bugzilla and attach a complete dmesg log. The "pci=nocrs" parameter may be a workaround while debugging the problem.

To use "pci=nocrs", edit the syslinux.cfg boot file and add pci=nocrs to the parameters. On systems that boot from a USB memory stick, this file is /media/usb/syslinux.cfg Example:

timeout 20
prompt 1
default grsec
label grsec

kernel /boot/grsec append pci=nocrs initrd=/boot/grsec.gz alpine_dev=usbdisk:vfat modules=loop,cramfs,sd-mod,usb-storage quiet

Hardware

After update to 2012 Marathon sound is disabled

Delete .pulse directory in you home folder.

Impossible to activate video driver for graphics cards on 82945G/GZ chipsets

To load Intel video driver for cards on 82945G/GZ chipsets, one should perform the following actions:

  • Open ROSA Control Center and choose "Boot->Configure boot steps->Set up boot system"
  • Add pci=noacpi to kernel options and reboot the system
  • Now you can enable Intel video driver for your graphics card

Please refer to bug 198 for more details.


Users software

Unable to remove Klipper from the system tray

By default possibility to remove Klipper from tray is disabled. You can enable it by modifying corresponding configuration file.

Just add/update corresponding parameter in the [General] seciton on

AutoStart=false


Caution: Use this solution at your own risk! (see comment).

Crackling sound in Skype

In file /etc/pulse/default.pa, replace the line:

load-module module-udev-detect 

by:

load-module module-udev-detect tsched=0

Then restart the computer. For more information, see bug #288.

No sound in ROSA Media Player with mp4 videos

Remove rosa-media-player and install it one more time from the official repositories.