Mock-urpm
Mock is a program that builds packages inside a chroot, originally by Fedora Project. The chroot contents are defined by a set of config files.
This package can be found in Rosa repositories. The newest version - in my private repository x86_64 or i586.
To install, run "sudo urpmi mock-urpm"; this will set up proper users, so you can instantly fire
sudo mock-urpm /path/to/src.rpm --enable tmpfs
See logs and results in /var/lib/mock-urpm/{rootname}/results.
Read more at "man mock-urpm". The tool originates from Fedora, see an article about mock there.
Description
Mock-urpm is a simple program that will build source RPMs inside a chroot. It doesn't do anything terribly fancy other than populate a chroot with the contents specified by a configuration file, then build any input SRPM(s) in that chroot.
The content of a chroot is specified by the configuration specified with the -r option. The default configuration file is /etc/mock-urpm/default.cfg, which is usu‐ ally a symlink to one of the installed configurations.
There is a site-wide configuration file, /etc/mock-urpm/site-defaults.cfg, which can be used to specify site-wide options. The shipped version of this file has no active options, but does have a list of all of the configuration options, examples of how to set them, and their default values.
To use mock-urpm, a user should become a member of the mock-urpm group by adding their username to the mock-urpm line in /etc/group. This can be done with the fol‐ lowing command:
sudo /usr/sbin/usermod -a -G mock-urpm $USER
This command is executed automatically after the packet installation. Note that mock is not intended to be run directly as root.
SCM
Using SCM (GIT/CVS/SVN) is really easy. Edit config files (there are examples with comments in site-defaults.cfg). Write the correct 'method' option ('git',
mock-urpm --scm-enable --scm-option package=PKG_NAME --scm-option branch=BRANCH_NAME SCM
must have a .spec file. Sources can be placed in tarball, but putting '.write_tar' file to the project root will make mock-urpm to create NAME-VERSION.tar.gz archive.
Commands
| Command | Description |
|---|---|
| --clean | Purge the chroot tree. |
| --scrub=TYPE | Completely remove the specified chroot or cache dir or all of the chroot and cache. TYPE is one of all, chroot, cache, root-cache or c-cache. |
| --init | Initialize a chroot (clean, install chroot packages, etc.) |
| --rebuild | If no command is specified, rebuild is assumed. Rebuilds the specified SRPM(s). The buildroot is cleaned first, unless --no-clean is specified. |
| --buildsrpm | Builds the specified SRPM either from a spec file and source file/directory or from SCM. The buildroot is cleaned first, unless --no-clean is specified. |
| --shell | Run the specified command interactively within the chroot (which must already be initialized -- no 'clean' is performed). If no command specified, /bin/sh is run. |
| --chroot | Run the specified command non-interactively within the chroot (which must already be initialized -- no 'clean' is performed). Command output will be sent to the log files. |
| --installdeps | Find out deps for SRPM or RPM, and do a urpmi install to put them in the buildroot. Buildroot must already be initialized -- no 'clean' is performed |
| --install | Do a urpmi install PACKAGE inside the buildroot. Buildroot must already be initialized -- no 'clean' is performed |
| --update | Do a urpmi update inside the buildroot. Buildroot must already be initialized -- no 'clean' is performed |
| --orphanskill | No-op mode that simply checks that no stray processes are running in the chroot. Kills any processes that it finds using specified root. |
| --copyin | Copies the source paths (files or directory trees) into the chroot at the specified destination path. |
| --copyout | Copies the source paths (files or directory trees) from the chroot to the specified destination path. |
Options
| Option | Description |
|---|---|
| -r CHROOT, --root=CHROOT | Uses specified chroot configuration as defined in /etc/mock/<chroot>.cfg. If none specified, uses the chroot linked to by /etc/mock/default.cfg |
| --no-clean | Do not clean chroot before building package. |
| --cleanup-after | Clean chroot after building. Use with --resultdir. Only active for '--rebuild'. |
| --no-cleanup-after | Don't clean chroot after building. If automatic cleanup is enabled, use this to disable. |
| --target=ARCH | This argument is passed to rpmbuild to specify the target arch to build. It defaults to whatever is specified for --arch, or whatever is specified in the config file as config_opts['target_arch']. |
| --arch=ARCH | Calls the linux personality() syscall to tell the kernel to emulate a secondary architecture. For example, building i386 packages on an x86_64 buildhost. |
| -D "MACRO EXPR", --define="MACRO EXPR" | Specify macro definitions used for the build. This option may be used multiple times, just as the rpmbuild --define option can be. For example: --define "with_extra_cheese 1" --define="packager Monkey" |
| --with=OPTION | Enable configure OPTION for build. This option may be used multiple times. For example: --with=extra_cheese |
| --without=OPTION | Disable configure OPTION for build. This option may be used multiple times. For example: --without=anchovies |
| --resultdir=RESULTDIR | Change directory where resulting files (RPMs and build logs) are written. Resultdir can contain python-string substitutions for any variable in the chroot config. For example: --resultdir=./my/"%(dist)s"/"%(target_arch)s"/ |
| --uniqueext=text | Arbitrary, unique extension to append to buildroot directory name |
| --configdir=CONFIGDIR | Change directory where config files are found |
| --rpmbuild_timeout=SECONDS | Fail build if rpmbuild takes longer than 'timeout' seconds |
| --unpriv | Drop privileges before running command when using --chroot |
| --cwd=DIR | Change to the specified directory (relative to the chroot) before running command when using --chroot |
| -q, --quiet | Be quiet. |
| -v, --verbose | Output verbose progress information. |
| --trace | Enables verbose tracing of function enter/exit with function arguments and return codes. Useful for debugging mock itself. |
| --enable-plugin=PLUGIN | Enable the specified plugin. This option may be used multiple times. |
| --disable-plugin=PLUGIN | Disable the specified plugin. This option may be used multiple times. |
| -h, --help | Show usage information and exit. |
| --version | Show version number and exit. |
Examples
To rebuild test.src.rpm using the configuration for x86_64 named "my_configuration"
mock-urpm -r my_configuration-x86_64 --rebuild /path/to/test.src.rpm
Note that the available configurations are found in the /etc/mock-urpm directory with the extension .cfg. To specify a configuration use the filename without the trailing .cfg extension.
To place the output RPMs and logs in a specified location.
mock-urpm --resultdir=./my-results /path/to/your.src.rpm
To build a package from the default SCM repository configured in site-defaults.cfg or in user config use the following arguments.
mock-urpm --scm-enable --scm-option package=pkg
