Difference between revisions of "Errata ROSA Marathon X1"
(→Installation) |
(→Installation) |
||
| Line 18: | Line 18: | ||
</pre> | </pre> | ||
| − | ===Very long boot time | + | ===Very long boot time with VMWARE installed=== |
| − | In case your boot takes very long time you can try disabling pcscd service. It can be done via drakxservices, or by executing command | + | In case your boot takes very long time you can try disabling pcscd service in your host system. It can be done via drakxservices, or by executing command |
<pre>systemctl disable pcscd.service</pre> | <pre>systemctl disable pcscd.service</pre> | ||
from root user. | from root user. | ||
Revision as of 17:55, 21 May 2012
Contents
Installation
Boot from hardisk does not work
If your bootloader is located not on the first physical disk, this option will not working.
System boots into the 'Live' mode after reboot
After system installation is complete and you reboot the machine, do not forget to eject your installation DVD or USB media, since by default the 'Live' mode will activated. Alternatively, you can change the priority of boot devices or choose 'Boot from hard drive' when booting from the installation media.
If installed from USB Flash, the system displays a message about 'Emergency mode'
If you install the system from USB Flash, you can a message about 'Emergency mode' after removing installation media rebooting. If this is the case, just insert the USB Flash back, load from it, choose 'Boot from hard drive' and finalize the installation (there will be several question from wizard). After that, you will be able to boot the system normally.
If you have Windows partitions, you may need to load Windows and run scandisk.
Incorrect resolution with Intel graphics cards
If you have a modern Intel graphics card, you may need to delete the following parameter from the boot loader menu entry:
nomodeset
Very long boot time with VMWARE installed
In case your boot takes very long time you can try disabling pcscd service in your host system. It can be done via drakxservices, or by executing command
systemctl disable pcscd.service
from root user.
Hardware
After update to 2012 Marathon sound is disabled
Delete .pulse directory in you home folder.
Impossible to activate video driver for graphics cards on 82945G/GZ chipsets
To load Intel video driver for cards on 82945G/GZ chipsets, one should perform the following actions:
- Open ROSA Control Center and choose "Boot->Configure boot steps->Set up boot system"
- Add pci=noacpi to kernel options and reboot the system
- Now you can enable Intel video driver for your graphics card
Please refer to bug 198 for more details.
Users software
Unable to remove Klipper from the system tray
By default possibility to remove Klipper from tray is disabled. You can enable it by modifying corresponding configuration file.
Just add/update corresponding parameter in the [General] seciton on
AutoStart=false
Caution: Use this solution at your own risk! (see comment).
